Wood Stove - BLUE RIDGE 100
250 - 1,200 ft²small17" (16" recommanded)1.8 g/hComplete your purchase
AC01336
5"Ø FRESH AIR INTAKE KIT
AC02050
BLOWER WITH VARIABLE SPEED CONTROL | 100 CFM
AC02055
QUICK CONNECT THERMODISC
Our most compact unit in the series, the Blue Ridge 100 is the perfect choice for heating homes up to 1,200 ft². With only 1.8 g/h of particulate emissions, this EPA certified wood stove puts out an impressive 45,000 BTU/h. The bottom of its combustion chamber is deeper than other models in its category and allows a greater accumulation of ashes, and thus able to empty them less frequently. A simple model; reliable and robust.
Included: pedestal, ash lip, air intake damper & rear air deflector
- High efficiency 1.8 ft³ firebox, ideal for tight spaces
- Up to 5 hours burn time
- Steel top reinforced with a stainless steel heat shield
- High density refractory bricks
- Cast iron door and ceramic glass
- Glass airwash system for a cleaner view of the flames
- EPA certified
- Proudly made in USA and Canada
- Non-catalytic combustion system
- Certified for mobile home and alcove installation
| Average overall efficiency-dry cordwood (HHV) | 74 % |
| Fuel type | Dry cordwood (16" recommended) |
| Maximum heat output-dry cordwood | 45,000 BTU/h (13.2 kW) |
| Optimum efficiency | 80 % |
| Overall firebox volume-ft³ | 1.8 ft³ |
| Maximum overall heat output rate | 26,700 BTU/h (7.83 kW) |
| Minimum overall heat output rate | 12,124 BTU/h (3.55 kW) |
| Recommended heating area-ft² | 250 - 1,200 ft² |
| EPA loading volume | 1.55 ft³ |
| Average overall efficiency-dry cordwood (LHV) | 79 % |
| Average CO | 74 g/h |
| Optimum heat transfer efficiency | 79 % |
| Overall dimension (Depth) | 29" |
| Overall dimension (Height) | 30 5/8" |
| Maximum burn time | 5 h |
| Average particulate emissions rate | 1.8 g/h |
| Overall dimension (Width) | 18 1/2" |
| Chimney diameter | 6" |
| Shipping Weight | 283 lb (128 kg) |
| Baffle type | High quality vermiculite |
| Canadian Standard (emissions) | CSA B415.1-10 |
| Canadian Standard (safety) | ULC S627 |
| Combustion technology | Non catalytic |
| Door opening size - Width (in) | 12" |
| Door opening size - Height (in) | 7 5/8" |
| Door type | Single, glass with cast iron frame |
| Firebox size - Depth (in) | 19 3/8" |
| Firebox size - Height (in) | 11 3/4" |
| Firebox size - Width (in) | 14 1/4" |
| Firebox lined with refractory bricks | Yes |
| Flue outlet diameter (in) | 6" |
| Glass surface - W x H (in) | 9 5/8" x 8 1/8" |
| Glass type | Ceramic glass |
| High-efficiency certified appliance | Yes, EPA 2020 approved |
| Log positioning | Loading over depth |
| Maximum log length | 17" (16" recommanded) |
| Minimum chimney height | 12' |
| Premium quality blower (CFM) | Optional |
| Stainless-steel secondary-air system | Yes |
| Steel thickness-body | 3/16" |
| Steel thickness-top | 1/4" |
| Certified according to applicable standards | By an accredited laboratory (CAN/USA) |
| Type of chimney | CAN/ULC S629, UL 103 HT (2100 °F) |
| USA Standard (emissions) | EPA |
| USA Standard (safety) | 1482, UL 737 |
| Warranty | 5 years limited |
| Approved for an alcove installation | Yes |
| Approved for a mobile home installation | Yes, with fresh air intake |
| Distance-center of the flue outlet to back unit | 6 5/8" |
| Distance-center of the flue outlet to side unit | 9 1/4" |
| Clearances to combustibles* | CanadaCan USAUsa |
| Single wall pipeDouble wall pipeSingle wall pipeDouble wall pipe | |
| Clearance - Corner | 7"11"11"18" |
|---|---|
| Clearance - Side wall | 18"18"18"84" |
| Clearance - Base of the unit to ceiling** | 84"84"84"14" |
| Clearance - Back wall | 6"12"6"7" |
*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
