BLUE RIDGE 500
Out of stock
1,000 - 2,700 ft²Extra Large22" oriented East-West1.6 g/hComplete your purchase
AC01281
RIGID FIRESCREEN
Out of stock
AC01336
5"Ø FRESH AIR INTAKE KIT
Out of stock
AC02050
BLOWER WITH VARIABLE SPEED CONTROL | 100 CFM
Out of stockIdeal for heating spaces up to 2,700 ft², the Blue Ridge 500 is a wood stove with an impressive output of 110,000 BTU/h. EPA certified at 1.6 g/h, this non-catalytic appliance represents an eco-responsible heating source. Its very large combustion chamber allows logs to be loaded across the width and depth.
Included: pedestal, ash drawer & lip, air intake damper & rear air deflector
▪ High efficiency 3.5 ft³ firebox
▪ Up to 10 hours burn time
▪ 5/16" steel top reinforced with a heat shield
▪ Cast iron door and ceramic glass
▪ EPA certified
▪ Proudly made in USA
▪ Non-catalytic combustion system
▪ Certified for mobile home and alcove installation
▪ Qualifies for the 30% US tax credit
Appliance dimensionsInstallation & Operation Requirements
| Fuel type | Dry cordwood (16" recommended) |
| Recommended heating area | 1,000 - 2,700 ft² |
| Overall firebox volume | 3.5 ft³ |
| EPA loading volume | 2.88 ft³ |
| Maximum burn time | 10 h |
| Maximum heat output-dry cordwood | 110,000 BTU/h |
| Minimum overall heat output rate | 17,200 BTU/h (5.0 kW) |
| Maximum overall heat output rate | 57,800 BTU/h (16.9 kW) |
| Average overall efficiency-dry cordwood (HHV) | 71 % |
| Average overall efficiency-dry cordwood (LHV) | 76 % |
| Optimum efficiency | 77 % |
| Optimum heat transfer efficiency | 75 % |
| Average particulate emission rate | 1.6 g/h |
| Average CO | 73 g/h |
| From serial # | 100 |
| Certifications | EPA-2020 |
| internalID | 160971 |
| Alcove installation approved | Yes |
| Mobile home approved | Yes, with fresh air intake |
| Certified according to applicable standards | CAN/USA accredited laboratory |
| Overall dimension (Width) | 28 1/8" |
| Overall dimension (Height) | 35 1/8" |
| Overall dimension (Depth) | 31 1/4" |
| Premium quality blower included (CFM) | Optional |
| Combustion technology | Non-catalytic |
| Stainless-steel secondary-air system | Yes |
| Flue outlet diameter | 6" |
| Distance-center of the flue outlet to back unit | 8" |
| Distance-center of the flue outlet to side unit | 14 1/8" |
| Recommended chimney diameter | 6" |
| Type of chimney | ULC-S629, UL 103 HT (2100 °F) |
| Minimum chimney height | 12' |
| Door type | Single, glass with cast iron frame |
| Door opening size (Width) | 19" |
| Door opening size (Height) | 9 7/8" |
| Glass type | Ceramic glass |
| Glass surface - W x H | 16 5/8" x 11 3/4" |
| Steel thickness-body | 3/16" |
| Steel thickness-top | 5/16" |
| Firebox size (Width) | 22 7/8" |
| Firebox size (Height) | 13" |
| Firebox size (Depth) | 20 1/8" |
| Log positioning | Loading over width and over depth |
| Maximum log length | 22" oriented East-West |
| Firebox lined with refractory bricks | Yes |
| Baffle type | High quality vermiculite |
| High-efficiency certified appliance | Yes, EPA 2020 approved |
| Canadian Standard (emissions) | CSA B415.1-10 |
| USA Standard (emissions) | EPA |
| Canadian Standard (safety) | ULC S627 |
| USA Standard (safety) | UL 1482, UL 737 |
| Warranty | Limited 5 years |
| Shipping weight | 480 lb (218 kg) |
| Clearances to combustibles* | CanadaCan United-StatesUsa |
| Single wall pipeDouble wall pipeSingle wall pipeDouble wall pipe | |
| Clearance - Back wall | 13 3/4"8"13 3/4"8" |
|---|---|
| Clearance - Side wall | 22"19"22"19" |
| Clearance - Corner | 12"12"12"12" |
| Clearance - Base of the unit to ceiling** | 84" 84" 84" 84" |
*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
